350 Legend Unprimed Rifle Brass 100 Count
Introduced by Winchester and approved by SAAMI in January of 2019, the .350 Legend is a brand new cartridge with no parent case. This tapered case has a rebated rim allowing it to utilize the standard .223 bolt face found on many common rifles including the AR-15. Like many other AR cartridges, the .350 Legend only requires changing the barrel and magazine. This cartridge’s allure is that it can be used for hunting in several states that allow straightwall cartridges only, but it doesn’t have near the recoil of other AR cartridges that fill this niche. Utilizing .355″ diameter bullets, the .350 Legend is capable of impressive ballistics, without a lot of recoil. Several bolt action and AR-type rifles are being produced in this caliber, with new models being added all the time.
This is not loaded ammunition.
Free shipping on orders over $800!
- Satisfaction Guaranteed
- No Hassle Refunds
- Secure Payments
350 legend ammunition was developed to provide excellent performance at an affordable price for the high volume shooter. Featuring high quality Winchester components, this ammunition delivers outstanding reliability. This ammunition is loaded with a full metal jacket bullet which is known for its positive functioning and exceptional accuracy. On impact this bullet does not expand and is ideal for target shooting. This ammunition is new production, non-corrosive, in reloadable brass cases.
The all-new 350 Legend is a high-performing straight-walled cartridge that is ideal for hunters and sport shooters. Offering high velocity and low recoil, the 350 Legend is easy to shoot. Generations of legendary excellence, consistent performance and outstanding value continues with Winchester
Hornady produces brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.